manualshive.com logo in svg

Electronics Diversified SMART, User Manual

Share
Download
Electronics Diversified SMART User Manual Download Page 16

SMART System

STATIONS

15

To Record a Preset:

Adjust Channel Level Con-
trols to desired levels.
Press and hold Record button.
Press Preset to be stored in.
Release both buttons.

View Fade Rate:

Press M/R button.

To Change Fade Rate of a Preset:

View Fade Rate.
Press and hold Record button.
Use M/R Control to raise or
lower fade rate.
Release Record when fin-
ished editing. This changes
the fade rate of the active
preset.

CHANGING ZONE PAGES:

Slider stations have programmable
zonal paging, allowing the user to edit
all or some of the zones within a room
reguardless of slider station configura-
tion and zones within a room. The
user can view 4,6,8, or 10 zones at a
time (based upon how many slider
controls there are). The user can
advance or “page” to another group of
zones within the room. Thus on a 4
channel slider the user can view the
following zones: 1 through 4 on the
first page,  5 through 8 on the second
page, 9 through 12 on the third page,
and 13 through 16 on the fourth.

Summary of Contents for SMART
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands