manualshive.com logo in svg

Electronics Diversified SMART, User Manual

Share
Download
Electronics Diversified SMART User Manual Download Page 15

SMART System

STATIONS

14

DIGITAL SLIDER STATION

1

2

3

4

5 6

7

8

9

1.

2.

3.

4.

5.

6.

7.

8.

9.

Presets 1-6 (7-12 when More is
activated)
Press a button to execute a preset in a
room.

Record Button
Used in saving levels to a preset. Also,
this button is used for paging different
channels. (See recording presets and
changing zone pages on pages 15
and 16).

Off Button
Press to Execute Preset 13 (Off).

More Button
Toggles between Presets 1-6 and 7-12.

Master/Fade Rate Button
Toggles the M/R display (9)  from
displaying master control use and the
fade rate of an executed preset. It will
also toggle the use of the M/R level
controls (6) from adjusting all zones
within a room to adjusting preset fade
rates when recording.

 Master/Fade Rate Control
Press to raise or lower level in a room
or adjust fade rate as desired (See
recording presets about fade rate
changes on page 15).

Channel Level Controls
Press to raise or lower an individual
channel level within a room.

Channel Levels
10-segment LEDS show intesity values
from 0 to 100% on each channel.

M/R Levels
10-segment LEDs shows master fader
action and fade rates up to 5 minutes.

Summary of Contents for SMART
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands