manualshive.com logo in svg

Electronics Diversified SMART, User Manual

Share
Download
Electronics Diversified SMART User Manual Download Page 35

34

SMART System

LOCKOUTS

Select Lockout Action 1:

This should be already
 selected, if not:
Press  Lockout.
Use Down button to
select lockout action 1.

Select the 10-Button Station:

Press  Station.
Use Up/Down buttons to
select station 0.

Select Action ON for the Lockout Action:

Press  Action.
Press the On selection to
the right.

Now Setup a Lockout Action to
unlock the 10-Button,

Select Lockout Action 2:

Press  Lockout.
Use Up button to
select lockout action 2.

Select the 10-Button Station:

Press  Station.
Use Up/Down buttons to
select station 0.

Select Action OFF for the Lockout
Action:

Press  Action.
Press the Off selection to
the right.

Press Menu to go to Preset Menu.

Lockout  1

            On

Station 1

            Off

Action: On

     None

Zone 1

30

Lockout  1

             On

Station 0

             Off

Action: none

      None

(overrride)

Lockout  1

             On

Station 0

             Off

Action: none

      None

(overrride)

Lockout  2

             On

Station 0

             Off

Action: none

      None

(overrride)

Lockout  2

            On

Station 1

            Off

Action: Off

     None

Zone 1

Lockout  2

             On

Station 0

             Off

Action: none

      None

(overrride)

Summary of Contents for SMART
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands