Plus
8
=THRU:
Groups of Dimmers or Channels are selected.
= AND:
Sets of Dimmers or Channels are selected.
EXAMPLE:
= CLEAR:
Removes last entry.
Upon pressing ENTER, a window blinks, indicating where the
next data entry will go.
CLEAR removes data entry in the current window and moves to
the next window, left.
ENTER accepts the data in the current window and moves to the
next window, right.
AT defers acceptance of data in the current window and moves
to the next window, right.
= AT:
Ends entry and moves active window to the
right.
EXAMPLE:
EXAMPLE:
KEYPAD
HINT: The keypad is the entrance to Blind/Edit functions.
This capacity allows access to memory functions
different from the Stage output. In the Blind Mode, edits
to levels may occur without affecting the existing stage
picture.
EXAMPLE:
CONTROLS
= LAST:
Selects the previous number.
= NEXT:
Selects the next number.
EXAMPLE:
EXAMPLE:
= ENTER:
Accepts numbers and stores information.
EXAMPLE:
= FL:
Assigns 100% value to entry.
= PRESET:
Selects editing of recorded Presets.
EXAMPLE:
EXAMPLE:
