Plus
6
0
5. SHOW VERSION:
Current software version installed is displayed.
Select:
SET-UP
CRT DISPLAY
TO ACCESS SET-UP:
Hold (SHIFT) and press (5) (SETUP).
NOTE: Use NEXT, LAST keys to position highlight bar on CRT
or enter number and press ENTER.
On models without CRT, enter number on keypad. For
item to be selected, press ENTER to start.
1. Test Channels
2. Change Channel Count
3. Test Dimmers
4. Change Dimmer Count
5. Show Version
6. Clear Memory
7. Unity Patch
8. Modulus Patch
9. Auto Follow Wrapping
10. +Independent Not Assigned GM
11. Check Disk
12. Format Disk
13. Midi Address
14. Remote Store
[ SETUP ]
UP
0
1
SE
0
4. CHANGE DIMMER COUNT:
Select:
Current Dimmer count is displayed. Select new dimmer
count less than 512 and press ENTER. Patch operations
are limited to number selected.
1.
TEST CHANNELS:
Select:
All Channels are set to the level of Fader 1 and individually set
to the level of Fader 2 at a rate determined by the Independent
Fader.
Press CLEAR to stop test.
KEYPAD DISPLAY
2.
CHANGE CHANNEL COUNT:
Select:
Current channel count is displayed. Select new channel
count less than available channels and press ENTER.
3.
TEST DIMMERS:
Select:
All Dimmers are set to the level of Fader 1, and individually set
to the level of Fader 2 at a rate determined by the Independent
Fader.
Press CLEAR to stop test.
