Electromed WellnessPro + User Manual Download Page 3 | Manualshive

Page: 3 / 60

background image

© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,

Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc

3

Foreword

Thank  you  for  purchasing  the  WellnessPro  2010  Plus  Electrotherapy  Unit.  This  manual  contains  general
safety,  operating,  maintenance  and  care  instructions  for  the  owners  and  operators  of  the  WellnessPro  2010
Plus Unit.

At  the  time  of  publication  the  information  contained  herein  was  current  and  up  to  date.  However,  due  to
continual technological improvements and increased clinical knowledge in the field of electrotherapy, as well as
our  policy  of  continual  improvement,  Electromedical  Technologies,  Inc  reserves  the  right  to  make  periodic
changes  and  improvements  to  their  equipment  and  documentation  without  any  obligation  on  the  part  of
Electromedical Technologies, Inc.

Read,  understand  and  follow  the  information  contained  in  this  manual.  Stay  current  with  the  latest  clinical
developments in the field of electrotherapy and observe all applicable precautionary measures for treatment.

Keep informed on appropriate indications and contraindications for the use of electrotherapy.

For the existing users of the WellnessPro

®

2010:

The WellnessPro

®

2010 was improved and the successor model is the WellnessPro 2010 Plus. The indications

of use and applications have not been changed. The same programming principles apply.  The user interface
has  been  improved  in  order  to  simplify  programming  and  use  of  the  device.  This  manual  will  explain  those
improvements.

Please send all Company Correspondence to

:

Electromedical Technologies, LLC

3104 E. Camelback Rd. #528

Phoenix, AZ 85016

Manufacturer Location:

Electromedical Technologies, LLC

16561 N. 92

nd

Street, #101

Scottsdale, AZ 85260

Tel: (888) 880-7888

Fax: (480) 452-1518

Visit our website:

http://www.electromedtech.com

Customer Service email:

[email protected]

Technical Support email: [email protected]

«
1
2
3
4
5
...
»

Summary of Contents for WellnessPro +





























































Reviews:

No comments

Related manuals for WellnessPro +

Brand: GE Pages: 14

Brand: GE Pages: 11

Brand: GE Pages: 20

Druck ADTS 2 Series

Brand: GE Pages: 18

Brand: Hanil Pages: 60

Brand: Keiser Pages: 2

Brand: ECA Pages: 3

Brand: Nautilus Pages: 12

SATURA SPOT LED PRO

Brand: Elation Pages: 41

Brand: Tapco Pages: 16

Brand: Zenbooth Pages: 40

Visium CytAssist

Brand: 10x Genomics Pages: 51

Chromium X Series

Brand: 10x Genomics Pages: 5

Brand: BACtrack Pages: 16

Brand: Tascam Pages: 8

Brand: lancer Pages: 3

Brand: lancer Pages: 12

Brand: R2 Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands