© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
42
FLUX mode (On/Off)
When
button is pressed,
“FLUX: on” will appear at the bottom left corner of the screen.
This function will work in standard and/or dual mode
To turn off the FLUX function, press
button again. Message “FLUX: on” will disappear from the
screen.
FLUX function is the ability for frequencies inside of the auto code to fluctuate “X” amount of Hz (if desired).
Default value for the FLUX function is 3 Hz.
To change default value
press and HOLD
button for
2 SECONDS.
Well
will “beep” twice and the new message:
“Enter FLUX range (1-10 Hz) will appear.
Note:
FLUX feature must be ON if you want to change default value.
Dual STIM: on
Multi AUTO: on
WellnessPro PLUS
Ready
FLUX: on
Multi AUTO: on
WellnessPro PLUS
Dual STIM: on
Ready
Ready
FLUX: on
