Electrolux W4105H Installation Manual Download

Page: 20 / 60

Installation

5917

5918

5919

5920

5921

5922

Installation on an excisting floor or foundation

Instead of braking up the excisting floor or foun-
dation, chemical bolts M16 can be used.

Mounting instruction

• Drill ø 18 mm (11/16") to a depth of 125 mm

(5"). Do not make the hole too deep.

• Clean the drilled holes.

• Put down the chemical ampule in the hole.

• Rotate the bolt into the hole, so that the glass

ampule is broken and its contents mixed.

• Rotate the bolt to correct depth.

NOTE!

Do not rotate the bolt against the con-

crete bottom. Check that the chemicals have
filled the hole completely.

• Remove the drilling machine with the moun

ting tool. Hold the bolt with one hand. Let the
bolt harden before the machine is mounted.

Time for hardening, due to different concrete
temperatures.
– 10°C

6 hours

– 5°C

2.5 hours

± 0°C

1 hour

5°C

30 minutes

10°C

20 minutes

15°C

15 minutes

20°C

10 minutes

Summary of Contents for W4105H





























































Search results

Summary of Contents for W4105H

Reviews:

Related manuals for W4105H

Brands by name

Popular brands

Electrolux W4105H, Installation Manual

Search results

Summary of Contents for W4105H

Reviews:

Related manuals for W4105H

Brands by name

Popular brands