8
* Certain models only
Getting the best results
Hard floors and carpets:
* The Max In, Max In Turbo and Max In motorised floor
nozzles (7) detect the type of surface being vacuumed.
* The nozzle with the pedal is set to the type of surface
to be vacuumed: Position 1 for carpets (23) and
position 2 for hard floors (24).
* Use normal setting of floor nozzle for carpets (25)
* Use the brush setting of floor nozzle for hard floors
(26)
Crevices, corners, etc.:
Use the crevice nozzle (12).
Upholstered furniture:
* Use the upholstery nozzle (13a).
* Use the combination nozzle as shown in (13b).
Reduce suction power if necessary.
Frames, bookshelves, etc.:
* Use the dusting brush (14a).
* Use the combination nozzle as shown in (14b).
* Using Max In nozzles
Max In, Max In Turbo and Max In motorised floor
nozzles, are ideal for both hard floors and carpets. The
Max In motorized nozzle receives power via the tube
and hose, and no additional electrical connections
are needed. A blue light on the nozzle indicates that
the brush roller is turning. If anything should become
lodged in the brush roller, the light turns off.
Note: Do not use the Max In Turbo or Max In motorised
nozzles on fur rugs, rugs with long fringes or pile depths
exceeding 15 mm. To avoid damaging the carpet, do not
let the nozzle stay in one place when the brush is rotating.
Do not pass the nozzle over electrical cords, and be sure
to switch off the vacuum cleaner immediately after use.
12
23
25
24
26
7
13a
14a
14b
13b
