14
* Certain models only
If something gets stuck in the vacuum
cleaner:
44 Turn off the vacuum cleaner and open the cover at
the front of the unit by lifting the release catch.
45 Lift out the filter holder and the filters.
46 Lift the cover between the filter wells and remove
anything that may have got stuck. Also check the
bottoms of the filter wells for foreign objects.
47 Refit the cover under the catches and close it by
pressing down. Put the filter holder back in place
and close the vacuum cleaner cover.
Cleaning the Max In and carpet/floor nozzles
48 The Max In and the carpet/floor nozzles should be
cleaned frequently to avoid losing suction power.
The easiest way to do this is by using the hose
handle.
Cleaning the motorized nozzles
(Certain models only)
Always unplug the vacuum cleaner from the wall
outlet before cleaning.
49 To remove the brush roller cover, push the outer
latch out, and the middle cover to the left, and this
will also free the wheels for cleaning.
50 Lift out the brush roller and clean it. Remove
entangled threads etc. by snipping them away
with scissors. Refit in the reverse order. The
auxiliary wheels should be carefully pulled
straight out.
Cleaning the turbo nozzle
(Certain models only)
51 Disconnect the nozzle from the vacuum cleaner
tube and remove entangled threads, etc. by
snipping them away with scissors. Use the hose
handle to clean the nozzle.
Cleaning the dust container
The dust container can be thoroughly cleaned when
emptying.
52 Remove the dust container.
53 Empty it.
54/55
Remove the “cone” on the side with your finger by
pulling it up and straight on.
The dust container and the ”cone” can now be wiped
off or cleaned. If you use water, make sure that the
cartridge is dry before you put it back. Refit the cover
back on by pushing it straight in. Put back the dust
container.
44
45
46
47
48
51
50
54
52
53
49
