10
* Certain models only
Parking position
27 When you pause during cleaning, the tube can be
attached to the rear of the vacuum cleaner.
28 When storing, the vacuum cleaner can be placed
on end and the tube attached at the bottom of
the vacuum cleaner.
How to use the telescopic tube
29 Extend or shorten the telescopic tube by
pushing the release button towards the nozzle
and simultaneously adjusting the length of the
telescopic tube. There is a catch at both ends of
the telescopic tube. Certain models only have one
release button.
Emptying the dust container
Electrolux Twinclean’s dust container must be emptied
when it is full to the Max sign. The dust container must
never be overfilled.
30 Press the release button at the rear of vacuum
cleaner.
31 Lift the dust container out.
32 Empty the dust by first pushing the release catch
on the underside of the dust container, then hold
the container over a wastebasket. Put the dust
container back and press the rear part of the
container until it clicks into place.
Cleaning the dust filter
Electrolux Twinclean has a dust filter that should be
cleaned now and then to secure a high suction.
When it is time to clean the filter, the filter light on the
vacuum cleaner will flash. The filter is cleaned while in
the vacuum cleaner.
33 Turn off the vacuum cleaner when the filter light
flashes.
34 Open the cover by lifting the release catch.
35 Lift up the filter holder and turn it a half turn so
that the filters change places with each other and
put the filters back into the vacuum cleaner.
36 Turn the left filter a full turn in the direction of
the arrow. The filter light begins to flash and the
vacuum cleaner starts, and as you turn, the filter is
cleaned.
After you have made a full turn, the vacuum cleaner
turns off and the filter light stops flashing. You can now
close the cover.
About once each year, when the filter light begins to
flash more frequently, the filters need to be washed.
A Lift out the filters according to the above.
B Remove one filter at a time from the filter
container (37) by pressing the marked release
button and turning the filter.
C Rinse the filters in lukewarm water and let them
dry.
D Thread the filters back into the filter holder.
The filters may turn grey over time. This is normal and
does not hamper the suction. Large dust particles
may accumulate on the filters without hampering
suction. To remove the dust, simply wash the filters as
described above.
27
28
32
30
31
33
34
35
36
37
29
