Electrolux TC2, Service Manual, Page: 58 / 78

SOI/DT 2010-03 dmm
58/78
599 72 84-41
12 DRYING CIRCUIT
1. Fan
2. Fan
motor
3. Heating element casing
4. Conduit
5. Bellow
seal
6. Tub-condenser sleeve
7. Drying condenser
8. Solenoid valve
9. Condensation intake tube and steam vent
tube
10. Solenoid valve-air break tube
11. Coupling (Air-break)
12. Filter body
13. Drain pump
Automatic drying cycles: the drying time is controlled by the micro-processor so that the desired degree of
drying is achieved.
The drying cycle can be performed at the end of the washing cycle, or as a separate programme.
Three types of drying can be selected:
ƒ
extra dry
ƒ
wardrobe dry
ƒ
iron dry
Time-controlled cycle: The drying time is selected by the user (max. 130 minutes for cotton and synthetic
fabrics).
Cooling: a cooling cycle is performed at the end of every drying cycle.
Anti-crease: after the cooling phase, a 10-minute anti-crease phase is performed
The drying heating elements
are powered directly by the main PCB via two relays .
In the cycles for synthetic fabrics, the drying is performed with only one heating element (half power); in the
cotton - linen cycles both heating elements are powered (full power).
The fan motor is powered via a relay; the condensation
solenoid valve is powered by a triac .
The wash of the condenser occurs at the beginning of the last rinse.