Electrolux TC2 Service Manual Download Page 31

Page: 31 / 78

SOI/DT 2010-03 dmm

31/78

599 72 84-41

6 DEMO MODE SETTING

Version TC4

Version TC3

“Time Manager” “Proportional”

Version TC2

“Time Manager” “Proportional”

1. Switch off the appliance
2. Press

the

START/PAUSE

button and the nearest

option button

simultaneously (as shown in the figure).

3. Holding down both buttons, switch the appliance on by turning the programme selector

by three

positions clockwise

4. Hold the buttons down until

“

dEM

”

flashes for a short time.

6.1 Exiting DEMO mode

To exit demo mode, switch the appliance off (programme selector in off/cancel position)

7 DIAGNOSTIC

SYSTEM

7.1 Accessing

diagnostics

Version TC4

Version TC3

“Time Manager” “Proportional”

Version TC2

“Time Manager” “Proportional”

1. Switch off the appliance
2. Press

the

START/PAUSE

button and the nearest

option button

simultaneously (as shown in the

figure).

3. Holding down both buttons, switch the appliance on by turning the programme selector

by one position

clockwise

4. Hold the buttons down until the LEDs and symbols begin to flash in sequence (at least 2 seconds).
In the first position, the operation of the buttons and the related LEDs is checked; turn the programme
selector knob

clockwise

to run the diagnostic cycle for the operation of the various components and to ready

any alarms.

7.2 Quitting the diagnostics system

→

To exit the diagnostic cycle, switch the appliance off, then back on and then off again.

Summary of Contents for TC2















































































Search results

Summary of Contents for TC2

Reviews:

Electrolux TC2, Service Manual, Page: 31 / 78

Search results

Summary of Contents for TC2

Reviews: