SOI/DT 2010-03 dmm
11/78
599 72 84-41
•
wash phase indicator LEDs
:
LEDs L13, L12, L16 are configurable and are used as indicators of the wash phases.
Possible indications
Pre-wash
Lights during selection mode if the programme includes the pre-wash phase
and during the performance of the pre-wash
Wash
Lights during selection mode if the programme includes the wash phase and
during the performance of the wash
Pre-wash/Wash
Lights during selection mode if the programme includes the pre-wash or wash
phase and during the performance of these phases
Rinses
Lights during selection mode if the programme includes rinse phases and
during the performance of the rinses
Spin
Lights during selection mode if the programme includes the spin phase and
during the performance of the spin
Rinses / Spin
Lights during selection mode if the programme includes rinses and spin and
during the performance of these phases
Drain
Lights during selection mode if the programme includes the drain phase only
and during the performance of the drain
Extra rinse
Lights when this option has been memorised (if included in the cycle)
Rinse hold
Lights if the programme includes the rinse-hold option and at the end of the
cycle, when the appliance stops with water in the tub.
Cycle in progress
Lights during the performance of the cycle
End of cycle
Lights when the programme has been completed and the door has been
released
Door locked
Lights when the safety device stops the door opening and switches off when it
is possible to open it.
Flashes when the device is about to unlock the door (with door interlock with
PTC, which needs one or two minutes to open)
Child lock
Lights when the child safety is on and all buttons are deactivated
Drying
Lights during selection mode if the programme includes the drying phase and
during the performance of this phase.
•
LCD
The following information appears on the LCD display:
ª
the duration of the washing programme
, which appears after it has
been selected. This time corresponds to that necessary for the
maximum wash load for each type of programme. After the programme
has started, the time decreases (and is updated) minute by minute.
ª
-
the duration of the drying time.
ª
- the end of the programme
is indicated by
three flashing zeros
(when the door can be opened).
ª
The stopping of the appliance with water in the tub
, after the
programmes with the RINSE HOLD option, is displayed by
three
flashing zeros,
the LED that indicates the door remains lit and the
LED of the START/PAUSE button switches off.
ª
the delayed start
, selected on the related button. After the
START/PAUSE button is pressed, the countdown starts and the delay
time decreases hour by hour. In the last 2 hours, it decreases by 30
mins at a time.
ª
- The thermometer:
it is always on during the cycle and the icon is
animated during the heating phase.
