61
Cabinet, door reversal
487 1
9 24 0
0.01
P
487 1
9 24 0
2.01
1
C
2
A+B
Door reversal
The door reversal illustrated below is on a left-
hinged door:
1. Disconnect the power to the dryer.
2. Demount T-fitting
A
and screw the screws
back into the same holes (in order to secure
the plate on the back), fig. 1.
3. Disengage the door by carefully lifting it away
from the front. Make sure to get a good grip
on the door - it is heavy.
4. Demount T-fitting
B
, fig. 1.
5. Demount top plate.
6. Loosen cable tie with cable
C
and mount on
the opposite side, fig. 2.
7. Move fitting with door switch
D
to the opposite
side, fig. 3.
8. Move door handle to the opposite side of the
door and screw cover screws into holes.
9. Mount T-fitting
A
at the bottom of the right
side.
10. Engage the door by carefully lifting it back on
the fitting
11. Mount T-fitting
B
at the top of the right side.
Continued
3
D
