41
Motor and transmission
Motor description
The motor is located in the bottom of the
dryer. The drive belt of the drum is connected
to the idler mounted next to the motor
shaft and a spring keeps the belt tightening
constant.
Overheating
The motor has an integrated overheating
thermostat which disconnects the power in
case of overheating. Error code
E05
will then
flash on the display.
When the motor cools down the overheating
thermostat switches back on automatically.
Replacing the motor
1. Disconnect the power to the dryer.
2. Demount the back plate.
3. Demount the spring.
4. Demount the drive belt.
5. Demount the multiple plug, fig. 1.
6. Demount the motor by unscrewing the 2
screws, fig. 2.
7. Now replace the complete motor, console
and belt wheel.
1
2
Note!
Console, pulley, arm, the
small belt and the spring can be
replaced separately.
