19
Periodic maintenance
40 mm
1
2
Functional inspection
Functional inspection comprises:
1
.
Checking the door switch
.
2.
Test run
.
1. Check the door switch
Check whether the safety lock works. The drum
must stop when the door is opened. When the
door is closed again, the tumbler must not start
until the start button is pressed.
2. Test run
Check that the fan, drum rotation and heat all
stop when the door is opened max. 40 mm.
Maintenance
The following should be carried out at regular
intervals, depending on the frequency of use.
Daily
• Check that the drum stops when the door is
opened.
• Check that the lint screen under the door has been
cleaned. Use a soft brush or your hand, fig. 2.
• Check that the lint screen is not damaged.
• Check that the tumble dryer will not start until the
start/stop button has been activated.
