Electrolux ProClean RealLife EDW1xxx-2G Series, Service Manual

Page: 21 / 57

SOE/PR 21 599 72 48-93
7.6 EDW3510
In the edw3510 touch version, you can only enter service mode with the appliance turned ON and on stand-
by awaiting instructions. Hold down buttons 1 and 2 simultaneously as configured and wait a few seconds.
After 3 seconds, the display prompts the Alarms check
•
Touch (3) to enter the alarms menu/activate individual components
The sequence is defined as follows:
1. Alarm 1
2. Alarm 2
3. Alarm 3
4. Regenerating solenoid valve
5. Drain pump
6. Fill solenoid valve
7. Heating element (if the level of water is reached)
8. Washing pump (at 2800 rpm)
9. Detergent dispenser
10. Drying fan
•
Touch (4) followed by (3) to test the LEDs
•
Touch (4) twice followed by (3) to Select the Test Cycle (15’)
•
Touch (4) 3 times followed by (3) to Enable/Disable the extra rinse
•
Touch (4) 4 times followed by (3) to Set the Brightness
•
Touch (4) 5 times followed by (3) to Set the Contrast
•
Touch (4) 6 times followed by (3) to Set the Regenerating Level