Electrolux GWH 11 NanoPlus EU, User Manual

Page: 4 / 16

4 www.home-comfort.com
Notices for professional installers
• The instruction for operation and
installation is absolutely necessary part
of the heater and is provided along with
the heater. Please read the documents to
guarantee that you have comprehended
all the data for an installation, operation
and safe service.
• All specific adjustments and inspection
for the heater must be provided with the
documents which entail the company seal
and signature of the installer.
• The heater can be only installed onto the
wall of a room without frosts.
• The installation can only be operated
by qualified personnel with reference to
the instruction and additional documents
provided by the manufacturer. Attention
should be paid to the relevant prescriptions
and norms as well as additional local
regulations.
• Professional refers to a person who is
familiar with technical knowledge relevant
to heating technology and drinking water
supply.
• The heater can only be put into use under
the appropriate environmental condition.
• Debugging and the inspection for the
quality of gas along with energy efficiency
of the heater should be under the charge
of qualified professional installers.
• As for user installation, specified
adjustments should be done only within the
chapter peration Manual?
• During construction, the heater must be
carefully protected from dirt and other
pollution.
• The heater is only apt for the home water
heating, and it should be connected to a
home water system corresponding to the
technical requirements of the heater.
• The heater can only be installed for
the anticipated operation stated by
manufacturer.
• Do not leave the packing materials
(cardboards, nails, bolts, plastic plate
and other similar materials) within reach
of children. All maintenance and repair
can only be operated by authorized
professionals.
• If necessary, please cut off the power
supply before initiating cleaning and
maintenance.
• Neither the seals nor stamps can be
destroyed.
• If it is necessary for definitive rupturing
operation, please cut off all the
connections respectively (electrical
power, hydraulic power, gas feeding,
exhaust pipe) and make sure all of them
are disconnected. The heater and its
components must be treated according to
the locally effective prescriptions.
• The manufacturer would not take
responsibility for any damage caused by
incorrect installation or use, or by violation
of the corresponding prescriptions. Neither
would the quality guarantee be offered.
Notices for the user
• Manual for installation and maintenance
should be well kept. If replacing the heater,
please provide this manual to its successor.
For maintenance service, please give this
manual to professional serviceman for
reference.
• Maintenance, electric installation and
inspection should be operated by
professionals.
• In case of failure, please disconnect the
power supply of the heater immediately
and make contact with its installer. Private
treatment to the failure is not allowed.
• Neither the seals nor stamps can be
destroyed.
• Improper handling or manipulation may
cause accidents.
• No touches on hot parts of the heater such
as all the tubes and exhaust pipe. Any
contact with hot parts can cause burn.
Children and laymen must keep remote
from the heater during its operation.
• For long-term nonuse of the heater, please
close the valve and take out the batteries.
If necessary, please disconnect power
supply of the heater.
• Any leakage from the heater to be found
can be caused by parts failure or deficient
installation. Please make contact with its
installer.
• For regular operation of the heater, don’t
close intakes on the door and wall.
• No exposure of the heater in a steamy and
greasy environment such as place with a
hearth.
• No exposure of the heater in a place with
water splash such as bathroom and other
wet environment.
• No objects on the water heater.
• Operation of the heater by children or
laymen is not allowable, neither is improper