Electrolux EWM 1000 PLUS Service Manual Download Page 10

Page: 10 / 59

SOI/DT 2005-07 dmm

10/59

599 37 22 15

4.5 Description of options

4.5.1 Night

cycle

Eliminates all spin phases and adds

three

rinses in COTTON cycles and

two

rinses in SYNTHETICS

cycles.

Stops the appliance with water in the tub before the final rinse.

Switches off the buzzer (if configured)

To drain the water, select a drain or spin cycle.

4.5.2 Rinse-hold

Stops the appliance with water in the tub before the final spin cycle.

Switches off the buzzer (if configured)

To drain the water, select a drain or spin cycle.

4.5.3 Pre-wash

Adds a pre-wash phase at the start of the cycle with water heating to 30°C (or cold, if selected).

In COTTON and SYNTHETICS cycles, performs a short spin (impulse) before passing to the washing

phase.

This option cannot be selected for the WOOL and HAND-WASH cycles.

4.5.4 Soak

Adds a pre-wash phase (30’ duration with wool cycle movement) at the start of the cycle with water

heating to 30°C (or cold, if selected).

In COTTON and SYNTHETICS cycles, performs a short spin (impulse) before passing to the washing

phase.

Together with the delayed start option it is possible to select a soak time from 30 minutes up to 10 hours.

This option cannot be selected for the WOOL and HAND-WASH cycles.

4.5.5 Stains

Adds a 5-minute motor movement phase after heating to 40°C.

Ducts water to the pre-wash/stains compartment in order to introduce the special stain-removal product.

This option cannot be selected for DELICATES, WOOL and HAND-WASH cycles.

The movements during the washing phase change from vigorous to normal.

4.5.6 Short

(daily)

Modifies the structure of the washes in the COTTON and SYNTHETICS programmes in order to obtain

good washing performance with a short cycle (optimization for small loads).

4.5.7 Very

short

Modifies the structure of the COTTON, SYNTHETICS and DELICATES programmes in order to obtain

very short washing times (optimization for small or lightly-soiled loads).

Reduces the number of rinse cycles (one less).

Increases the water level in the remaining two rinse cycles.

4.5.8 Intensive

Modifies the washing phase by adding 10 minutes of normal movement in the cotton programme.

4.5.9 Economy / Energy label

Modifies the structure of the COTTON 40°/50°/60°/90° - SYNTHETIC FABRICS 50°/60° programmes in

order to reduce energy consumption.

Reduces the washing temperature in 90°/60°/50° programmes, while for the 40° programme the

temperature is increased by 4°.

Increases the duration of the wash phase.

Summary of Contents for EWM 1000 PLUS




























































Search results

Summary of Contents for EWM 1000 PLUS

Reviews:

Related manuals for EWM 1000 PLUS

Brands by name

Popular brands

Electrolux EWM 1000 PLUS, Service Manual

Search results

Summary of Contents for EWM 1000 PLUS

Reviews:

Related manuals for EWM 1000 PLUS

Brands by name

Popular brands