11
TEMPERATURE DISPLAY
During normal operation, the temperature display
on the control panel shows the temperature inside
the appliance.
The temperature display will
flash
if
-
A different temperature is being set,
-
The temperature in the zone deviates by more
than 5°C from the set temperature.
The temperature display flashing ensures that the
temperature can not rise or fall un-noticed and
impair the wine.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption
(power surge,
breaker switch, etc.)
, the unit remembers the
previous temperature settings. When the power is
recovered, the cabinet temperature will go back
the same setting temperature as before the power
interruption.
TEMPERATURE ALARM
An alarm will sound if the temperature in one of
the zones rises or falls outside the temperature
range. The relevant temperature display will flash
at the same time.
The temperature the appliance is set at
determines the temperature the appliance
recognises as being too warm or too cool.
The alarm will sound and the temperature display
will flash:
-
When you switch the appliance on, if the
temperature inside the appliance is very
different from the temperature set.
-
When there has been a lengthy interruption to
the power supply.
-
When too many items have been
put into the
unit at one time.
-
When
the door is not closed tightly.
DOOR ALARM
If the door has been left open for more than 60
seconds, the alarm will sound.
Once the set temperature has been reached in
the appliance, the alarm stops and the relevant
temperature display stops flashing. However, if
the noise disturbs you, you can switch the alarm
off before this if you wish by pressing the
POWER
key once. The alarm will stop. The relevant
temperature display continues to flash until the set
temperature has been reached. The display then
lights up constantly, and the alarm system is fully
active again.
INTERIOR LIGHT
The interior light makes it easy to view your wine
labels and enhances the display of your collection.
Touching the LIGHT mark toggles between 2 modes
of operation for the internal lights: functional (default)
mode and showcase mode. If you are in functional
(default) mode, the lights will turn on only when the
door is open. If you are in showcase mode, the
lights will be on whether or not the door is open.
The unit is equipped with a LED light fitting system.
To change the LED light fitting pls contact the
service department.
NOTE:
Please use only the original LED light fittings
provided by the manufacturer.
DYNAMIC CLIMATE / SILENT MODE
This Dynamic Climate mode enables the relative
humidity inside the unit and the temperature to be
distributed evenly around the interior so you can
store all your wine under exactly the same excellent
conditions. If you would like to use the unit to store
wine long term, the dynamic climate mode is a must.
This will create a continuous climate in the cabinet
which imitates that of a wine cellar.
In the Dynamic Climate mode, the interior fan
circulates the inside air evenly even the set
temperature is reached. Dynamic Climate mode is
NOT
the factory preset mode beacause of creating
noises and more energy consumption. To change to
Dynamic Climate mode, touch and hold the
DOWN
key for approximately five seconds. The wine cellar
will beep five times to confirm Dynamic Climate
mode is on. To change back to Silent (default) mode
(Also named as energy saving mode), touch and
hold the
UP
key for approximately five seconds.
The wine cellar will beep three times to confirm
Silent mode is on.
SABBATH MODE
Sabbath mode is available for the observance of
certain religious holidays. This mode turns off the
displays, interior light and audible alarms and
prevents them from turning on again. Normal
cooling operations will still take place.
To initiate Sabbath mode, press the
POWER
and
LIGHT
keys at the same time for at least 5 seconds.
The indicator light will flash four times and confirm
the Sabbath mode is ON.
