Electrolux EWG 10050 W, User Manual

Page: 33 / 40

Should the appliance power supply
cable need to be replaced, this
must be carried out by a Service
Centre.
Permanent connection
In the case of a permanent connection it
is necessary that you install a double
pole switch between the appliance and
the electricity supply (mains), with a
minimum gap of 3 mm between the
switch contacts and of a type suitable
for the required load in compliance with
the current electrical regulations. The
switch must not break the yellow and
green earth cable at any point. This
operation must be performed by a qual-
ified electrician.
Building-in
This appliance has been designed to
be built into the kitchen furniture. The
recess should have the dimensions
shown in picture A.
Preparation and assembly of the
door
The machine is originally pre-arranged
for the assembly of a door opening
from right to left.
In this case it is sufficient to screw in
the hinges (1) and the counter-magnet
(6) provided with the appliance, at the
right level (Fig. B).
a) Door
The dimensions of the door should be:
- width
595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the
height of the adjacent furniture's base.
4
6
5
1
2
3
7
B
P0982
P09 65
820 min
570 min
.
600
596
416
176,5
818
541
195
490
160
120
90
8
515
165
A
600
installation electrolux 33
132966740.qxd 16/06/2008 11.11 Page 33