Electrolux EWG 10050 W, User Manual

Page: 13 / 40

Select the Delay Start by pressing
button
6
Before you start the programme, if you
wish to delay the start, press the
button
6
repeatedly, to select the
desired delay. The relevant light
illuminates. By pressing this button it is
possible to delay the starting of the
washing programme by
3 , 6 and 9
hours. You must select this option after
you have set the programme and before
you press the button
5
.
You can cancel the delay time at any
moment, before you press the button
5
.
If the button
5
has already been
pressed:
• set the washing machine to PAUSE
by pressing the button
5
;
• press the button
6
once, the light
relevant to the selected delay goes off;
• press the button
5
again to start the
programme.
Important!
• The selected delay can be changed
only after selecting the washing
programme again.
• The door will be locked throughout
the delay time. If you need to open the
door, you must first set the washing
machine to PAUSE by pressing the
button
5
and then wait some minutes
until the pilot light
7.2
. After you have
closed the door, press the button
5
again.
The DELAY START can not be selected
with DRAIN programme
Altering an option or a running
programme
It is possible to change some options
before the programme carries it out.
Before you make any change, you
must pause the washing machine by
pressing the button
5
.
Changing a
running programme is possible only by
resetting it. Turn the programme
selector dial to
O
a
nd then to the new
programme position. Start the new
programme by pressing the button
5
again. The washing water in the tub will
be not emptied out.
Interrupting a programme
Press the button
5
to interrupt a
programme which is running, the green
pilot light starts blinking. Press the
button again to restart the programme.
Cancelling a programme
Turn the selector dial to
O
to cancel a
programme which is running. Now you
can select a new programme.
use electrolux 13
132966740.qxd 16/06/2008 11.11 Page 13