Electrolux EWG 10050 W, User Manual

Page: 30 / 40

30 electrolux installation
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it’s back to
remove the polystyrene base from the
bottom.
2. Remove the power supply cable and
the draining and inlet hose from the
hose holders on the rear of the
appliance.
3. With the supplied spanner unscrew
and remove the central rear bolt A .
Slide out the relevant plastic spacer.
HE C 0001
HE C 0008
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C .
5. Remove the bracket D and refit the
six smaller bolts C .
C
C
BI0012
BI0011
D
BI0010
C
C
B
B
BI0009
A
132966740.qxd 16/06/2008 11.11 Page 30