25
Washing Drum
The washing drum is made of high-quality stainless
steel. Rust deposits on the drum can occur due to
foreign bodies in the washing which can cause rust.
Attention!
Do not clean the stainless steel drum with
acidic antiliming agents, scouring agents containing
chlorine or iron or steel wool. Our Customer Service
Department has suitable agents available.
Remove any rust deposits on the drum using a stain-
less steel cleaning agent.
Filling Door
Check regularly whether there are deposits or foreign
bodies in the rubber sleeve behind the filling door
and, if so, remove them.
Cleaning the drain pump
Paper clips, nails and so on can sometimes get into
the washing machine with the washing and remain in
the drain pump casing. Fluff and strands of fabric
can gather on these items and block the drain pump.
Therefore the drain pump should be cleaned at least
once a year.
1
Warning!
Switch off the washing machine
and pull out the mains plug before cleaning
the drain pump!
1.
First carry out an emergency emptying (see sec-
tion ”Carry Out Emergency Emptying”).
2.
Place a towel on the floor in front of the cover of
the solution pump. Residual water can run out.
3.
Unscrew the drain pump cover anticlockwise and
pull it out.
4.
Remove any foregin bodies from the pump
housing.
