background image

10

Additional Program Buttons

The additional program buttons are for adapting the
washing program to the dirtiness of the washing.
Additional programs are not required for washing
which is not excessively dirty. 
Various functions can be combined with each other,
depending on the program.

PRE WASH (Vorwäsche, Prélavage)

Warm pre wash before the main washing cycle which
follows on automatically; with intermediate spin for
COTTONS/LINEN (Koch-/Buntwäsche, Couleurs),
without intermediate spin for EASY-CARES (Pflege-
leicht, Textiles Melanges) and DELICATES (Fein-
wäsche, Délicat).

SOAKING (Einweichen, Trempage)

Approx. 50 minutes at 30 °C. Extendable with the
button DELAY TIMER (Zeitvorwahl, Départ Différé) to
max. 10  hours and approx. 20 minutes. This is fol-
lowed automatically by the main wash.

QUICK WASH (Kurz, Court)

Shorter washing cycle for slightly dirty washing.

STAIN (Flecken, Tâches)

For treating very dirty washing or stained washing.
In-wash stain treatment is added during the program
on a time-optimized basis. May only be used for
wash temperatures from 40°C as stain removers only
become effective at higher temperatures.

3

With the WOOL (Wolle, Laine)/

P

 (handwash)

program, it is not possible to select the addi-
tional programs (any pressed buttons have
no effect).

Summary of Contents for EWF 1386













































Reviews: