16
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER allows the start of a wash-
ing program to be advanced by 1 to a maximum of
19 hours.
To do this, press the button DELAY TIMER (Zeitvor-
wahl, Départ Différé) as often as necessary until the
required start delay is shown in the multidisplay,
e.g.
12h
in the form for a program start delay of 12
hours.
If
19h
is shown and you press again,
0h
and after-
wards the run time of the set washing program
appears (display in minutes, e.g.
126
). In this state,
the delay timer is not set.
Soaking Duration
With the SOAKING (Einweichen, Trempage) button
pressed, you can extend the soaking duration with
the button DELAY TIMER (Zeitvorwahl, Départ
Différé). Maximum 10 hours and approx. 20 min.
3
Without delay timer, the soaking duration is
approx. 30 minutes, plus a pre-wash time of
approx. 20 minutes.
To set, press the button DELAY TIMER (Zeitvorwahl,
Départ Différé) as often as necessary until the
required soaking duration is shown in the multidis-
play, e.g.
1h
(= 1 hour).
After approx. 2 seconds, the multidisplay shows the
run time in minutes.
This run time is comprised as follows:
3
While SOAKING (Einweichen, Trempage) is
running, PRE WASH (Vorwäsche, Prélav-
age) lights up on the program sequence dis-
play.
selected soaking period e. g.
1h
=60 minutes
+ heating up/prewash
period
e. g. approx. 20 minutes
+ run time of the selected
washing program
e. g. approx. 126 minutes
= displayed value
e. g. approx. 206 minutes
