7
Troubleshooting
Problem
Possible cause
Solution
The soleplate is not heating
even though the iron is
plugged.
Connection problem.
Check main power supply cable, plug and outlet.
The temperature control is in
‘0‘ position.
Select adequate temperature with the temperature selector (J).
See the “Ironing chart recommendation”.
The iron does not produce
steam.
There is not enough water in
the tank.
Fill the water tank and check the temperature setting. See the
“Ironing chart recommendation”.
The iron is set on •
Adjust the temperature setting according to the label.
The spray function does not
work.
There is not enough water in
the tank.
Fill the water tank.
The steam boost or the
vertical steam boost function
does not work.
There is not enough water in
the tank.
Fill the water tank.
The steam boost function was
used very frequently within a
short period of time.
Put the iron in the vertical position and wait until the
temperature indicator light (H) turns green before using the
steam boost or vertical steam function again.
The iron is not hot enough.
Adjust the temperature setting to •• or higher. Put the iron in
vertical position and wait until the temperature indicator light
(H) turns green.
Water leaks from the soleplate
during ironing.
The iron is not hot enough.
Set the temperature selector to a temperature (•• to maximum)
suitable for steam ironing. Put the iron on its heel and wait until
the temperature indicator light (H) turns green.
Flakes and impurities come
out of the soleplate during
ironing.
You have used hard water,
which has caused scale flakes
to develop in the water tank
Use the auto-clean function one or more times (J).
Water leaks from the soleplate
while the iron is cooling down
or after it has been stored.
The iron has been put in
horizontal position while
there is still water in the water
tank.
Empty the water tank and set the temperature selector (J) to
position ‘0’ before storing the iron
Packaging materials
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g.
>PE<, >PS<, etc. Please dispose the packaging materials in the recycle bin.
Old appliance
The symbol
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product,
please contact your council, your household waste disposal service.
Disposal
