B A
1.
Remove the bottom plate of the oven
cavity (
A
) for access to the gas oven
burner (
B
).
C
2.
Release the two screws (
C
) which
keep the gas oven burner in position.
D
E
F
3.
Carefully move the gas oven burner
off the injector support (
D
).
Slowly move it to the left side. Make
sure that the gas oven burner bush
stays on the burner mouthpiece. Do
not apply force to the wire of the
spark plug connector (
E
) and to the
thermocouple conductor (
F
).
4.
Unscrew the gas burner injector (
D
)
with a 7 mm socket spanner and re-
move it. Replace it with the necessa-
ry one (see the table "Gas Oven
Burner Data").
5.
Assemble the gas oven burner in the
opposite sequence.
6.
Replace the gas type sticker near the
gas supply ramp with the one appli-
cable to the new gas type (supplied
with the injector kit).
WARNING!
A primary air adjustment of the
gas oven burner is not necessary.
Minimum level adjustment of the gas
oven burner:
1.
Disconnect the mains plug from the
mains socket.
2.
Turn the control knob to the minimum
position and remove it.
3.
Adjust the adjustment screw (
G
) with
a thin bladed screwdriver.
ENGLISH
19
