WARNING!
Before installation, make sure that
the local supply conditions (the
type of gas and the gas pressure)
and the adjustment of the appli-
ance are compatible.
WARNING!
The adjustment conditions for this
appliance are located on the label
or rating plate.
WARNING!
The manufacturer is not responsi-
ble for damages caused by an in-
stallation which does not agree
with the instructions in the man-
ual.
Installation environment:
• This appliance is not connected to a
combustion products evacuation de-
vice.
• Only install the appliance in a room with
sufficient ventilation.
• Keep natural ventilation holes open or
install a cooker hood.
• There must be a 130 cm² minimum
opening in the built-in cabinet.
The use of a gas cooking appliance re-
sults in the production of heat and mois-
ture in the room in which it is installed. En-
sure that the kitchen is well ventilated:
keep natural ventilation holes open or in-
stall a mechanical ventilation device (me-
chanical extractor hood). Prolonged inten-
sive use of the appliance may call for ad-
ditional ventilation, for example opening a
window, or more effective ventilation, for
example increasing the level of mechani-
cal ventilation where present.
13.2
Gas connection
The gas supply ramp is on the rear side of
the control panel.
WARNING!
Do not use rubber flexible pipes!
WARNING!
Before the gas connection,
disconnect the mains plug
from the mains socket or de-
activate the fuse in the fuse
box. Close the primary valve of
the gas supply.
A
B
C
A)
Flexible metallic pipe
B)
Gasket
C)
Olive
A
B
C
D
E
A)
Rigid metallic pipe
B)
Nut
C)
Olive
D)
Male / female adapter
E)
Gas supply ramp
1.
Do not fully move the oven into the
built-in cabinet (approximately 30 cm).
There are two connection modes:
a)
Connection with a flexible metallic
pipe (maximum length: 2 m):
• Put the supplied gasket be-
tween the pipe and the gas
supply ramp.
• Turn the pipe to the 1/2" gas
supply ramp.
b)
Connection with a rigid metallic
pipe (soft copper, minimum diam-
eter: 8 mm):
ENGLISH
17
