Electrolux EL6985, User Manual

Page: 12 / 20

12
11
6 7 8
9
12 13 14
5a
10
5b 4
1 2 3
A
B
English
*A washable filter can be bouught as an option.
1 The s-bag™ dust bag must be replaced when the indicator
window is completely red. Read indicator with the nozzle
lifted.
2 Fold down the carrying handle. Press the catches on the
hose, remove the hose and open the cover.
3 Lift out the insert holding the s-bag™.
4 Pull the cardboard to remove the s-bag™ from the insert.
This automatically seals the s-bag™ and prevents dust
leaking out.
5 a Insert a new s-bag™ by pushing the cardboard right into
the end of the groove in the insert.
5 b Attach the insert by placing it on the back pegs in the bag
compartment. Then fold down the insert and close the
cover.
Replacement of the motor filter
should be done with every 5th replacement of the dust bag,
6 Fold down the carrying handle. Press the catches, remove
the hose and open the front cover.
7
Lift out the insert holding the s-bag™.
8 Pull the motor filter holder upwards until it comes away
from the groove.
9 Carefully pull the old, dirty filter out of the filter holder and
replace it with a new motor filter.
10 Reattach the filter holder containing the new motor filter.
11 Replace the insert holding the s-bag™ and then close the
cover.
Replacement of the exhaust filter
should be done with every 5th replacement of the dust bag.
The filters must always be replaced with new ones and cannot
be washed.*
12
Fold up the carrying handle until it clicks into place.
13 Place your thumbs on the back edge of the lid and then
open the lid by pulling the handle backwards and upwards
with your index/middle finger.
14
Lift out the filter. Insert a new filter and replace the lid as
shown.
REPLACING THE S-BAG™ DUST BAG
Note: Replace the dust bag when the indicator is red, even if the bag
is not full (it could be obstructed). Also replace after vacuuming carpet
cleaning powder. Be sure to use only an original Electrolux s-bag™
Classic, s-bag™ Clinic or an s-bag™ Anti-odor dust bag.
Note - be sure to unplug the cleaner before changing the dust
bag or filter.
On/Off switch
International symbol I means On, international symbol O means
Off.