Electrolux EKC54503O, User Manual, Page: 24 / 28

14.4 Anti-tilt protection
WARNING!
You must install the anti-tilt pro-
tection. Install the anti-tilt protec-
tion to prevent the appliance to fall
with incorrect loads.
WARNING!
Your appliance has the symbol
shown on the picture (if applica-
ble) to remind you about the in-
stallation of the anti-tilt protection.
Make sure you install the anti-tilt
protection at the correct height.
80-85
mm
317-
322 mm
How to install the anti-tilt protection
1. Set the correct height and area for
the appliance before you attach the
anti-tilt protection.
2. Make sure that the surface behind the
appliance is smooth.
3. Install the anti-tilt protection 317 - 322
mm down from the top surface of the
appliance and 80 - 85 mm from the
side of the appliance into the circular
hole on a bracket. Screw it into the
solid material or use applicable rein-
forcement (wall).
4. You can find the hole on the left side
at the back of the appliance. See the
illustration.
5. If you changed the dimensions of the
cooker, you must align the non-tip
device correctly.
If the space between the bench
cupboards is larger than the width
of the appliance, you must adjust
the side measurement to center
the appliance.
14.5 Electrical installation
The manufacturer is not responsi-
ble if you do not follow safety pre-
cautions from the chapter "Safety
information".
This appliance is supplied without a main
plug and a main cable.
Applicable cable type: H05 RR-F with ad-
equate cross-section.
24 www.electrolux.com