Electrolux EKC54503O, User Manual, Page: 23 / 28

Problem Possible cause Remedy
The residual heat indica-
tor does not come on The cooking zone is not
hot because it operated
only for a short time. If the cooking zone must
be hot, speak to the
Service Centre.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre. The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
14. INSTALLATION
WARNING!
Refer to the Safety chapters.
14.1 Location of the appliance
You can install your freestanding appli-
ance with cabinets on one or two sides
and in the corner.
A
A
B
Minimum distances
Dimen-
sion
mm
A 2
B 685
14.2 Technical Data
Dimensions
Height 858 mm
Dimensions
Width 500 mm
Depth 600 mm
Total electricity
power 7935 W
Voltage 230 V
Frequency 50 Hz
14.3 Levelling
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
ENGLISH 23