26
Conversion from Natural to LPG
Gas
IMPORTANT
The replacement/conversion of the gas cooker
should only be undertaken by a CORGI
registered engineer.
It is important to note that this model is designed
for use with natural gas but can be converted for
use with butane or propane gas providing the
correct injectors are fitted. The gas rate is
adjusted to suit.
Method
Ensure that the gas taps are in the 'OFF' position
Isolate the hob from the electricity supply
Remove all pan supports, burner caps, rings,
crowns and control knobs.
With the aid of a 7mm box spanner the burner
injectors can then be unscrewed and replaced
by the appropriate LPG injectors (see Table at
page 20).
TO ADJUST THE GAS RATE
With the aid of a thin bladed screwdriver
completely tighten clockwise the by pass screw.
Upon completion stick the replacement rating
plate near the gas supply pipe.
Replacement of gas oven
burner nozzle
To replace the gas oven nozzle, follow this proce-
dure:
a) remove the bottom of the oven;
b) undo screw 1 and take the oven burner out;
c) with a socket spanner 7 unscrew and remove
the nozzle, situated in the bottom of the oven,
and replace it with the proper one (see Table at
page 20);
d) reassemble the burner following the same pro-
cedure backwards.
FO 1072
