27
FO 1061
Minimum level adjustment
of gas oven burner
After setting the oven on maximum temperature
with door closed for about 10 minutes, turn the
knob on minimum.
To reach the thermostat by-pass screw and
adjust the minimum level, act as follows:
take out the knobs;
remove the front panel;
in case of conversion from natural gas to LPG,
tightly screw the by-pass screw of thermostat
(see fig.);
to convert from LPG to natural gas, unscrew
the by-pass screw, until a regular small flame
is reached.
finally check that turning quickly the tap from
maximum position to minimum position, the
flame does not go out;
reassemble the front panel and the knobs.
The oven burner does not need any primary air
regulation.
Replacement of grill burner
nozzle
To replace the grill burner nozzle, follow this
procedure:
a) remove the screws (see fig.);
b) take the grill burner out;
c) with a socket spanner 7 unscrew and remove
the nozzle, situated in the top of the oven, and
replace it with the proper one (see Table at page
21);
d) undo the fixing screw of the metal ring of primary
air adjustment and adjust the relevant opening
(see diagram);
e) reassemble the burner following the same pro-
cedure backwards.
Natural gas adjustment: full opening width
LPG adjustment: opening 10 mm wide
