background image

    

SA911XA

 

smeg 90cm ceramic electric cooktop, touch control

ID070113

Code SA911XA

EAN

3760120861628

size

900mmW x 520mmD x 55mmH

cutout

860mmW x 490mmD

finish

black ceramic frameless surface

edge

bevelled ceramic

zones

four plus two expansion zones

controls

touch

heat levels

nine per zone

timer

1–99 minutes programmable 

cooking times, simultaneous and 

variable times, audible signal

residual heat

hot surface ‘H’ LED warning

elements

all high-speed series 8 ribbon 

elements, full heat 7 seconds

warranty

in-house, two years parts and labour

kitchen timer

INDEPENDENT 1-99 minute timer 

with audible signal

PLEASE NOTE: smeg ceramic cooktops are highly-efficient 
cooking surfaces. They are at their most efficient with flat-
based cooking vessels. We recommend stainless steel exterior 
based vessels — that is, the surface be of stainless steel. This 
flat stainless steel surface will help preserve the unblemished 
look of the ceramic surface and help avoid scratching and 
permanent marking. High-quality cast-iron surfaces may also 
be suitable.

“GO AND STOP”

For improved energy and time efficiencies, when a heat setting is 
selected for a particular zone, full power is applied for a very brief initial 
phase before it returns to the preselected heat level. This pre-emptive 
heat aid is referred to as ‘go and stop’ in the cooktop’s accompanying 
instruction booklet.

AUTOMATIC STOP

Each zone can be preset with an individual cooking duration (up 
to 99 minutes). This timed cooking can be selected for respective 
different times on different zones — that is, all zones can be operated 
simultaneously and at different time settings. When the individual zone’s 
timed cooking duration elapses, the controls will flash ‘00’ and an 
audible signal will emit.

KITCHEN TIMER

The cooktop’s controls can also be used as an independent, variable 
countdown timer with audible end signal. Range is one through 99 
minutes.

THERMAL OVERLOAD PROTECTION

For safety, the cooktop will default to ‘OFF’ in any extreme conditions, 
such as a continuous overflow of boiling fluids or a utensil cooking its 
contents dry. Cooking can only be resumed after the fault has been 
cleared from the electronic LED safeguards. Also for safety reasons, 
cooking cannot resume automatically — it must be manually restarted.

WARNING:  technical specifications and product sizes can be varied by the manufacturer, without 

notice.  Cutouts for appliances should only be by physical product measurements.  The above 

information is indicative only. 

 

Reviews: