Electrolux EHS60210P, User Manual

Page: 20 / 88

temperatures and do not brown food too
much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do
not clean the appli-
ance with steam blasters or high-pres-
sure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the ap-
pliance operates.
To remove the dirt:
1. –
Remove immediately: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance. Use a special scraper
for the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
– Remove after the appliance is
sufficiently cool:
limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
WHAT TO DO IF...
Problem Possible cause and remedy
You cannot start the appliance
or operate it. • Start the appliance again and set the heat setting within 10
seconds.
• The child safety device or
operates. Stop child safety de-
vice or . See the section “Child safety device” or "Stop and
go".
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the con-
trol panel
A sound operates when the ap-
pliance is off. You covered one or more sensor fields. Uncover the sensor
fields. Clean the control panel.
The residual heat indicator
does not come on. The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
You cannot switch on the outer
rings. Switch on the inner ring first.
20 electrolux