4
Gas from the tank (
1
) is released from the
low pressure
regulator (
2
) into the hose or tube (
3
), travelling pass
the elbow coupling to the valve (
4
). To ignite the burner, press down and turn the safety valve (
5
) counter-
clockwise simultaneously. This opens up the valve, letting the gas to the nozzle of the burner (
6
), and turns the
ignition switch to
on (7)
at the same time. The electrical current is automatically supplied from the battery to
spark plug generator (
8
), and then to the pin heads (
9
), causing the ignition (
10
). The burner is ignited and bursts
into flame (
11
).
3. COMPONENTS SPECIFICATION
- Glass 2B : Float glass 8.0x500x760 mm
- Bottom plate forming : EG
- Knob : Phenolic PH31 heat + flame resistance
- Washer : fiber
- Hose end : Brass (size1/2@)
- Rubber grommet (glass model) : Silicone heat resistance
- Spark generator 4p : 1.5Vdc+90C+electrode10KV
