7
4. Remove burner mount retaining screws, 2 screws per burner and 4 on the wok burner (2.5mm Torque
Screwdriver required).
5. For models with a separate button ignition system, remove the switch button and ignition pack retaining nut.
Alternatively, lift the hob sufficiently to access and release the ignition leads and battery supply cable from
the ignition pack.
6. The hob may now be lifted away from the appliance.
By removing the hob the following parts are accessible for service or replacement.
•
Burner mounting cups.
•
Burner supply tubes.
Note: When fitting the burner tubes to the valves and burner mounting
cups the nuts should be fastened with a torque of 10-12Nm.
•
Manifold & Valves.
Note: To remove the manifold or valves it will be necessary to isolate and
disconnect the appliance from gas supply.
