Electrolux EDW 1100 Service Manual Download Page 48

Page: 48 / 56

8.4.9. Service menu / Water hardness

Scroll through to the water hardness option with the option button.

Service option is shown in the text line of the display.

(Example "

WATER HARDNESS 4

The water hardness setting is activated by pressing the Ok/Start button.

The currently set value appears in the text line of the display

The text part "WATER HARDNESS" is illuminated, the hardness flashes.

The water hardness can now be changed with each push of the option button.

However, in the service menu this is only possible in one direc

Sequence: ... - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 1 - 2 - 3 - 4 - 5 - ...

The text part "WATER HARDNESS" is illuminated, the hardness setting flashes.

The new water hardness setting is taken over by pressing the Ok/Start button.

The new water hardness setting is shown in the text line of the display.
(Example "

WATER HARDNESS 3

Leaving the function

After the button has been pushed for the last time, the service menu can be quitted as follows.

w
w

...by pressing the Reset button, the function is quitted and "SELECT
PROGRAM" appears in the text field of the display
or this occurs should no button be pressed within 60 seconds
or the dishwasher is deactived with the On/Off button.

OK / START

OPTION

RESET

oder automatisch nach 60sek.

OK / START

Summary of Contents for EDW 1100

























































Search results

Summary of Contents for EDW 1100

Reviews:

Related manuals for EDW 1100

Brands by name

Popular brands

Electrolux EDW 1100, Service Manual

Search results

Summary of Contents for EDW 1100

Reviews:

Related manuals for EDW 1100

Brands by name

Popular brands