SOI 05.09 FV
34/36
599 71 58-20
6.4 - REMOVING THE CONTROL BOARD
To remove the control board module, proceed as follows:
1. Remove the ceramic glass top.
2. Detach the connectors from the board (see fig. 47).
3. Detach the control unit board from the plastic spring clips (see fig. 48).
4. Lift the board and remove.
Fig.
47
1. INDUCTION COIL ASSEMBLY
2. COLIBRÌ CONTROL UNIT BOARD
3. CONNECTOR FROM CONTROL
BOARD TO POWER BOARD
4. CONNECTOR FOR FRONT
HOTPLATE POTENTIOMETER
5. CONNECTOR FOR REAR
HOTPLATE POTENTIOMETER
Fig.
48
1. COLIBRÌ CONTROL UNIT BOARD
2. PLASTIC SPRING CLIPS