SOI 05.09 FV
13/36
599 71 58-20
3.3 -
MAGNETIC INDUCTION COILS
The induction coils are inserted into an assembly which includes a support element (pos. 4, fig. 17).
A suspension spring is fitted beneath the coil assembly so that the coil is pressed upwards against the lower
surface in ceramic glass hob (pos. 6, fig. 16 and 17).
It is necessary to place a layer of heat insulating material (pos. 3, fig. 16 and 17) above the coil, and then the
NTC heat sensor and the aluminium locking tab (pos. 2 and 1, fig. 16 and 17).
3.3.1 -
140mm MAGNETIC INDUCTION COIL
Fig. 16
1
- INSULATING LAYER IN MICA
2
- ALUMINIUM LOCKING TAB FOR NTC SENSOR
3
- HEAT INSULATING LAYER
4
- NTC TEMPERATURE SENSOR
5
- COIL ASSEMBLY
6
- SUSPENSION SPRING
7
- RED CONNECTOR CABLE FOR COIL (POSITIVE)
8
- BLACK CONNECTOR CABLE FOR COIL (NEGATIVE)
9
- CONNECTOR CABLE FOR NTC SENSOR
