SOI 05.09 FV
32/36
599 71 58-20
6.3 - REMOVING THE POWER BOARD MODULE
To remove the power board module, proceed as follows:
1. Remove the ceramic glass top.
2. Remove the induction coil assemblies (see Section 6.2).
3. Detach the connectors.
4. Straighten out the anchor tabs (two on the right, two on the left) (see Fig. 43 e 44).
Fig.
43
1 - POWER BOARD MODULE
2 - ANCHOR TABS
Fig.
44
1 - ANCHOR TABS
2 - POWER BOARD MODULE