Electrolux Dito Ditomix 5, Instruction Manual, Page: 23 / 76

• Standard equipment: • Standard equipment:
• Standard equipment: • Standard equipment:
• Standard equipment:
A Kneading hook.
B Paddle for mixing.
C Whisk for emulsions
D Scraper spatula
1.
1
DESCRIPTION
• This beater mixer is a small semi-professional bakery and
pastry-making or kitchen appliance, designed for whisking and
mixing. It also provides good results for kneading. The power
take-off is used to power accessories such as a Ø50 mincer
and a vegetable slicer (or any accessory with a tapered press
fitting and 12mm square shaft). Being light and compact, it is
easy to use.
2.
2
LOCATION
This beater mixer can be stood on a stable, non-resonating
work table of a height of between 600 and 900 mm.
2.
1
DIMENSIONS - WEIGHT (for information only)
A Stainless steel bowl, 5.5 litre capacity
B Support
C Safety guard
D Integral accessories socket
E Cover
F Trim
G On / Off / Speed selector button
H Base
• Machine electrical specifications:
Introduction
Installation
- Gross weight when packaged: 13 kg
- Net weight when equipped: 11 kg
- Packaging dimensions: 450 x 350 x 490 mm
- Machine overall dimensions: 284 x 434 x 382 mm
1.
1b
2.
3
ELECTRICAL CONNECTION
• The beater is to be supplied with single-phase current.
• An easily-accessible, waterproof, standardised 10-16A, 2
pin + earth wall socket is required.
• Check that the electric mains voltage, the value shown on
the specification plate and the label on the power cable are
the same.
NO EARTH PLUG = NO PROTECTION = RISK OF FAILURE
Note: The earth values are defined according to the residual
differential current. (See standard NFC 15100 and PROMO-
TELEC guide). Non-compliance with these instructions may result
in invalidation of the warranty.
Supply Rating Frequency Current
(V) (W) (Hz) (A)
220/240 500 50/60 2,3
100/120 500W 50/60 4.6
Refer to the numbered drawings
that go with the numbered paragraphs in the instructions
Introduction 1
Installation 1
Use and Safety 2
Cleaning and Hygiene 3
Fault finding
Maintenance 4
Compliance with regulations 5
Parts list - exploded view A
Electrical diagrams E
Contents
GB
1
Ditomix 5 GB 07 05
2.
1
1.
1a
The machine must be earthed using the green and
yellow wire
• The machine must be protected by a residual current devi-
ce (RCD) and a 16 A fuse.
12/2005