Electrolux Combi TOUCH Series Page 39 User Manual Download

Page: 39 / 68

• If there is in agenda an event planned while the oven is still

working, the appliance advises that the event cannot start. It is
necessary to plan a new event.

F.11

USB mode

“USB“ mode allows to upload/download, from or into the
appliance, programs or other data by means of the USB pendrive.

1. Select USB from the upper drawer.

2. Choose the required function.

Download all

• Select Download all.

• Select the required items and confirm.

• The downloading can:

– replace a backup in the list;
– be saved with new name.

Touch

to confirm it.

• If selecting an existing backup the oven overwrites the current

one.
If selecting Add new name, type it on the appearing keypad. If
the new name already exists, a popup window informs that the
name has to be changed.

The download starts.

NOTE!
Do not remove the USB pendrive during the
download.

Upload all

• Select Upload all.

AGENDA

USER

December 2018

15:00

16:00

17:00

18:00

14:00

13:00

12:00

11:00

10:00

09:00

MANUAL

BEGIN:

HH:MM:SS

None

NOTE:

There is an event in the agenda

that is planned for now but the

oven is still working, so it is not

possibile to start the event.

Program’s name 5

BEGIN:

HH:MM:SS

NOTE:

There is an event in the agenda

that is planned for now but the

oven is still working, so it is not

possibile to start the event.

Medium cleaning

Half day medium cleaning

to repeat every three days in

December.

Chill

01:30

:00

USER

MANUAL

Soft / Hard

0°C

01:30 h:m

°C

Manual

Automatic

Programs

Cleaning

Settings

Usb

Skyhub

USB

Download

all

Upload

all

Download

selection

Upload

selection

USB

Parameters

Pictures

Sounds

ogs

Counters

iiiiiii

Agenda

Programs

Multitimer programs

Automatic presets

Multitimer presets

Download all

USB

Food safety HACCP

Food safety FSC

Automatic presets

Download all

Make it mine

Pictures
Programs

USB

Replace the backup in the

list or add it as new name

Do ou want to replace the ile or

add it as new name

Add new name

Backup 201 0607

Backup 201 0606

Backup 20171222

Backup 2017101

Backup 20160101

Add new name

Backup 20190607

Backup 20190606

Download all

Do not remove USB device.

Summary of Contents for Combi TOUCH Series





































































Search results

Summary of Contents for Combi TOUCH Series

Reviews:

Related manuals for Combi TOUCH Series

Brands by name

Popular brands

Electrolux Combi TOUCH Series, User Manual

Search results

Summary of Contents for Combi TOUCH Series

Reviews:

Related manuals for Combi TOUCH Series

Brands by name

Popular brands