Electrolux CGES3065P series, Service Manual

Page: 48 / 53

4-2
Section 4 Component Teardown
Electronic Oven Control (EOC)
To remove the Electronic Oven Control (EOC):
1. Access the Control Console (see “To access the
Control Console” on page 4-1 ).
2. Remove all wiring harnesses from EOC.
3. Remove four (4) screws securing EOC to Control
Console. See Figure 47 .
4. Reinstall in reverse order.
Electronic Surface Element Control - User
Interface Board (ESEC-UIB)
To remove the Electronic Surface Element Control-
User Interface Board (ESEC-UIB):
1. Access the Control Console (see “To access the
Control Console“ on page 4-1 ).
2. Remove all wiring harnesses from ESEC-UIB.
3. Depress four tabs securing the ESEC-UIB to plastic
housing (see Figure 48 ). Remove the ESEC-UIB.
4. Reinstall in reverse order.
Figure 47
Figure 48
Electronic Surface Element Control Rotary
Switches
To remove the Electronic Surface Element Control
Rotary Switches:
1. Access the Control Console (See “To access the
Control Console“ on page 4-1 ).
2. Remove all wiring harnesses from ESEC-UIB.
3. Remove the four (4) screws securing the ESEC-UIB
housing to the Control Console and remove ESEC-
UIB. See Figure 49 .
4. Remove Rotary Switch Knobs and nut securing
Rotary Switch to Control Console. See Figure 50 .
5. Reinstall in reverse order.
Cooktop and Surface Element Assembly
To remove the Cooktop and Surface Element
Assembly:
1. Remove the Control Console (see “To access the
Control Console“ on page 4-1 ).
2. Remove the four (4) screws securing the cooktop
frame to the oven’s upper trim. See Figure 51 .
Figure 50
Figure 49