Electrolux CGES3065P series, Service Manual

Page: 36 / 53

3-14
Section 3 Electronic Control Guide
To adjust the oven temperature lower :
1. Press bake for 6 seconds. UPO 0 will appear in the
display.
2.
To decrease the temperature, use the number keys to
enter the desired change (Example -30°F)
3 0
. Then,
press
self clean
. The temperature may be decreased as
much as 35°F (19°C).
3. Press start to accept the temperature change and the
display will return to the time of day. Press off to reject
the change if necessary.

NOTE
The oven temperature adjustments made with this feature
will not change the self clean cycle temperature or the broil
temperature.
The oven temperature adjustments are permanent and
will stay in the unit memory unless you manually change it
again or if all the controls are reset. Even a power outage
will not reset these changes. Follow the same procedure
again if you wish to change it to a different setting or use
the “ Restoring Factory Default Setting “ instructions on page
3-13 to restore settings to their defaults.
Setting the Sabbath Feature
(For use on the
Jewish Sabbath and Holidays)
The
bake time
and
start
keys are used
to set the Sabbath feature.
For further assistance, guidelines for
proper usage, and a complete list of
models with the Sabbath feature, please
visit the web at www.star-k.org.
The Sabbath feature may only be used with the bake
function. Once the oven is properly set using bake with
the Sabbath feature active, the oven will remain on until
cancelled. The Sabbath feature overrides the factory preset
12 hour energy saving feature.
If the oven light is needed during the Sabbath, press Oven
light before activating the Sabbath feature. Once the oven
light is turned on and the Sabbath feature is active, the oven
light will remain on until the Sabbath feature is turned off. If
the oven light needs to be off, be sure to turn the oven light
off before activating the Sabbath feature.
IMPORTANT
It is advised to not activate any cooking function other than
bake while the Sabbath feature is active.
To program the oven to begin baking immediately
and activate the Sabbath feature (example: baking
at 350°F) :
1. Be sure that the clock is set with the correct time of day.
2.
Place the food in the oven. Press
bake
.
350°
appears
in the display. Press
start
. The actual oven temperature
appears in the display.
3. If you desire to set the oven control for a bake time or
delayed bake time, do so at this time. If not, skip this
step and continue to Step 5. For delay start instructions,
see “ Setting Delay Start “ on page 3-9 . For bake time
instructions, see “ Setting Bake Time “ on page 3-8 .
Remember the oven will turn off after using bake time
or delay start and may only be used once during the
Sabbath/Jewish holidays. The maximum bake time is 5
hours and 59 minutes.
4.
The oven will turn on and begin heating.
5. Press and hold both the bake time and delay start
keys for at least 3 seconds. SAb will appear in the
display. Once SAb appears in the display, the oven
control will no longer beep or display any further
changes, and the oven is properly set for the Sabbath
feature.
6.
The oven may be turned off at any time by first pressing
off
(this will turn the oven off only).
7. To turn off the Sabbath feature, press and hold both the
bake time and delay start keys for at least 3 seconds.
SAb will disappear from the display.

NOTE
You may change the oven temperature once baking has
started by pressing bake and the numeric keys for the
new temperature. For example, to change from 350°F to
425°F, press 4 2 5 . Then, press start twice.
Only the following controls will function after setting the
Sabbath feature: numeric keypad, bake , start , and off . All
other features will not function once the Sabbath feature is
properly activated.
The display will not show temperature changes or sound
any audible tones when the oven is set with the Sabbath
feature.
Cooktop Sabbath Day Feature and (Sb) Message
The ESEC will display the Sb messages whenever the
Sabbath Day feature is active. When activated, the Sabbath
Day feature works for both the oven and cooktop together.
Once the Sabbath Day feature is active, changes to the heat
levels for the cooktop elements will not show in the displays.
The cooktop will react slower to heat level changes.