Electrolux CGES3065P series, Service Manual

Page: 26 / 53

3-4
Section 3 Electronic Control Guide
Setting Oven Lockout Feature
The key controls the oven lockout. When active, this
feature automatically locks the oven door, preventing the
oven from being turned on. It does not affect the clock,
timer, or the interior oven lights. When the Oven Lockout
key is activated, it also locks the cooktop. Dashes will appear
on the ESEC displays.
To activate the oven lockout feature :
1. Press and hold for 3 seconds.
2.
After 3 seconds,
door Loc
will appear, a tone will
sound, and the word
DOOR
and the icon will flash.
3. Once locked, DOOR and the lock icon will stop flashing
and remain visible with the Loc .
To reactivate normal oven operation
:
1. Press and hold for 3 seconds.
2.
After 3 seconds,
door Loc
will appear, a tone will
sound, and the word
DOOR
and the lock icon will
flash in the display until the oven door has completely
unlocked.
3. The oven is now fully operational.
Oven Light
The oven is equipped with two oven lights. The oven lights
will turn on automatically when the oven door is opened.
The oven light may be turned on when the door is closed by
using the oven light key on the control panel.

NOTE
The oven light will not operate during the self clean
function.
To toggle the oven lights on and off :
1.
Press .
2. The interior oven lights are covered with a glass shield.
The glass shield must be in place whenever the oven is
in use. To change the interior oven lights, see “ Replacing
the Oven Light” on page 3-22 .
Setting Preheat
The powerplus preheat/quick preheat feature is used
when a recipe calls for preheating the oven. When the
preheat stage ends, a tone will sound indicating when to
place the food in the oven. Preheat can be programmed for
temperatures between 170°F to 550°F and is not necessary
when roasting or cooking casseroles.
For batter and dough-based goods such as cakes, pastries,
and breads, use the regular bake or convection function for
best results.
To set the preheat temperature for 350°F :
1. Arrange the interior oven racks.
2.
Press
powerplus preheat/quick preheat
.
350
will
appear in the display. Press
start
.
3. 350 and PREHEAT will be displayed while the oven is
preheating.
4.
Press
off
when baking is complete or to cancel the
preheat feature.
To change preheat temperature while oven is
preheating (ex: changing from 350°F to 425°F) :
1. Press powerplus preheat/quick preheat . 350 will
appear in the display.
2. Enter the new preheat temperature. Press 4 2 5 .
3. Press start . 425 will show in the display.
4. When baking is complete, press off .

NOTE
• A beep will sound once the oven temperature reaches
425°F .
• Once the oven reaches the set temperature, the
control beeps, the word PREHEAT disappears from
the display, and the convection fan stops rotating. The
bake feature will display the set oven temperature and
will continue cooking at the set bake temperature.
• When preheated, place food in the oven. During
preheat, the convection fan is active during the first
rise in temperature to allow oven to reach its target
temperature faster. The bake, broil, and convection
elements will also cycle for a better heat distribution.
Setting Bake
Bake controls normal baking. If a rapid preheating is
preferred, refer to “ Setting Preheat . ” The oven can be
programmed to bake at any temperature from 170°F to
550°F.
To set the bake temperature to 375°F :
1.
Arrange interior oven racks.
2. Press bake . 350 will appear in the display.
3.
Press
3 7 5
.
4. Press start . The actual temperature will be displayed.
A beep will sound once the oven temperature reaches
375°F, and the display will show 375° .
5. When preheated, place food in oven.