Electrolux 520003, Instruction Manual

Page: 42 / 47

35
I11 Troubleshooting
Dishwasher unable to be energized
1
、
Ensure that the outlet socket is live;
2
、
Ensure that the plug is plugged into the outlet socket;
3
、
Check the fuse. Replace if necessary.
Bad washing result
1
、
Check that the suction filter is dirty and clean
thoroughly it;
2
、
Ensure that the washing nozzle is clogged by
residual solid food;
3
、
Check that the initialized detergent amount or
sequent addition is correct.
4
、
Too short selected washing cycle. Repeat this cycle;
5
、
Check that the water tank shall have a temperature of
55
℃
/ 131
℉
at least;
6
、
Check that the dishes are correctly placed in the dish
basket.
Not dried glasses and dishes
1
、
Check that vessel is not empty for quick-dry agent.
Fill if necessary.
2
、
Check the dosage setting of quick-dry agent (refer
to section "Connection to Distributor"
3
、
Check that the water temperature is 80-90
℃
.
Condensation on the glass
1
、
Check that vessel is not empty for quick-dry agent.
Fill if necessary.
2
、
Check the dosage setting of quick-dry agent (refer
to section "Connection to Distributor"
3
、
Remove the glass rack immediately after the end of
the cycle.
Stain on the glass
1. Use only special "foamless" detergent for dishwasher.
Too much foam in the water tank
1
、
Check that the washing water temperature is not less
than 55°C / 131°F.
2
、
Check that the dosage of the detergent distributor is
proper.
3
、
Ensure that improper detergent is not used for
cleaning the water tank. Drain the water tank and
flush thoroughly before new washing cycle;
4
、
If foamed detergent is used, drain the water tank and
filled with water until the foam is disappeared.
Stain or spot on the glass
1. Reduce the dosage of quick-dry agent (refer to section
"Connection to Distributor"
Slow rotation of washing or rinsing arm
1
、
Remove and thorough clean the washing arm;
2
、
Clean the suction filter of the washing pump;
3
、
Check that the water pressure is 2 bar.