Electrolux 520003, Instruction Manual

Page: 26 / 47

19
F1 Basic Control Key
"Power" key
Press the right power supply switch and the
indicator light of power supply is ON, indicating
that the machine is switched on. Press again the
power supply switch, the indicator light of power
supply is OFF and the unit's decimal point within
the rinsing temperature display area will be
flickering, indicating that the machine is switched
off.
Choosing Washing Cycle
From the left to right, the first indicator light ON
shows that the washing cycle is selected by 90s;
the second indicator light ON shows that the
washing cycle is selected by 120s. The third
indicator light ON shows that the washing cycle is
selected by 180 s.
Spraying temperature
The current boiler water temperature is displayed
and the diagnostic trouble code (DTC) is
displayed in case of fault.
Main washing temperature
The current water tank temperature is displayed
and the "Er-" is displayed in case of fault.
Function key
The setting key is located immediately under the
power supply switch. When the computer is
energized but not started, the parameters of the
dishwasher may be set with this key.
When the computer is started and in standby
state, the washing cycle time may be set with this
key.
Drain button
When the computer is in standby state, press the
button for 2 s and the machine is entered into the
drainage program. The machine will be stopped
after machine self-cleaning and drainage
program is automatically cycled for 3 s.
Start/Pause key
Used to start or pause the washing program.